A good general purpose stereo audio amplifier using the BA5406 monolithic power amplifier IC. Can be used on it's own or incorporated into existing equipment.
Supplied with components for either 28dB (standard) or 46dB (high) gain. The standard gain option is ideal for general audio applications and will be more suitable with most pre-amps or PC sound cards, etc.
Volume control is easily achieved by adding an externally mounted dual gang, logarithmic potentiometer of between 10K Ohm and 50K to the audio input.
Supplied with all components INCLUDING heat sink. Speakers and cables are NOT included.
SpecificationsInput Voltage | 5 - 15Vdc |
Current consumption | 1 - 2 Amps |
Power Supply Options | CFE011 or 12V dc battery |
Output | 3 Watts RMS/channel (4 Ohms, 12Vdc supply) 2 Watts RMS/channel (8 Ohms, 12Vdc supply) 2 Watts RMS/channel (4 Ohms, 9Vdc supply) |
Output impedance | 4 - 8 Ohms |
S/N ratio | > 85 dB, G=28 dB > 68 dB, G = 46dB |
THD | < 0.5% @ 1W |
Freq. response | 40 Hz to 100 kHz -3 dB (G = 28 dB, 8 ohm load) 50 Hz to 25 kHz, G=46dB |
Gain | 46dB standard or 28dB optional (see Product Documentation link below for details) |
Input level | < 200 mV, for full output (G = 28dB) 20 mV, G = 46 dB |
Input Impedance | ~ 100K ohm |
Heatsink Dimensions | 67 x 30 x 30mm |
Fixing holes | 4 x M3 @ 58 x 30mm centres |
Board Dimensions | 67L x 68W x 30Hmm including heatsink |
Connections | Solder pads |
Product Formats | SELF-ASSEMBLY Electronic Kit (KT) or PRE-ASSEMBLED Electronic Module (AS) Product Formats Info |
Documentation | User Manual BA5406 IC Data Sheet Amplifier Power Supply General Advice |