Fully assembled and tested Passive Infra Red (PIR) motion detector module measuring just 35x25x16mm as used in commercially made alarm systems. It can be used for detecting the presence of people, animals and other moving heat sources. Detection range is up to 8 metres.
Requires only three connections: V+, GND and OUT. We recommend that the module is used with a 5Vdc power supply (see Order Code 3133 for a 12Vdc, active low version of this product).
The output is a TTL active high going pulse with a minimum duration of 0.5 seconds that remains active as long as motion is detected. The output can be directly connected to a microcontroller, logic device or used to switch an external load via a transistorised or opto-isolated relay board (e.g. Order Code 1168, 3156, CT0004), our 3141 delay timer board, an opto-coupler (e.g. MOC3021) or triac. The low impedance (<35 Ohm) enables it to directly drive a small 100 Ohm relay through a 150uF series capacitor.
The modules main components are a PCB mounted Fresnel lens, an RE200B PIR sensor and a custom-made, surface mount movement detector IC.
Specifications| Power Supply | 5Vdc recommended (use a regulated supply like our CFE101 with connector 777.001UK or 778.106UK) |
| Supply Range | 4V minimum to 12Vdc absolute maximum |
| Operating current | 400uA at 5V |
| Power up delay | 25 seconds |
| Fixing Holes | 4 x M3 @ 19x30mm centres |
| Dimensions | 25x35x16mm |
| Product Format | Fully assembled module Product Formats Info |
| Documentation | Datasheet |
