Low cost micro-controller based 4 digit presettable LED down counter with four operating modes that control how the output behaves when count reaches zero. Suitable for low to high speed applications (30 to 4100cps). Ideal for process control and counting applications.
Accepts inputs from any make contact so can be used with switches, relay contacts, open collectors outputs or push buttons.
Two onboard push buttons (SET and INC) are used to set the operating mode and starting count.
Inputs for Count, Rate (debounce) and Reset (to preset value). Output is an open collector transistor (NPN, 100mA @30V). This can be used to trigger, for example, our 3156 relay board or the 3141 delay timer board.
The four operating modes are detailed in the User Manual (see Technical Specifications table below).
Count, Reset, Rate, Output and Power In are brought out to a 10-way header for easy connection. The board has Power-In reverse polarity protection.
SpecificationsSupply | 9...15Vdc e.g. Order Code 660.446UK with connector 777.001UK |
Current | 20 - 50mA max. |
Operating modes | Count Stop, Output Hold Over-Count, Output Hold Auto-Reset, One-Shot Output Over-Count, One-Shot Output |
Count range | 0000 to 9999 (10,000 max) |
Count speed (selectable) | Low: 30 cps (15mS high, 15mS low) High: 30,000 cps (measured) |
Inputs | Reset / Count / Rate |
Input trigger | make contact e.g. switches, relays, open collector outputs or simply push buttons |
Output Type | Open Collector Transistor, NPN, 100mA @ 30V (see Help Sheet) |
Display | 4-digit 7-segment with decimal point, 14mm RED LED |
Board Dimensions | 51x64mm |
Connections | 10 pin SIL header |
Product Formats | SELF-ASSEMBLY Electronic Kit (KT) or PRE-ASSEMBLED Electronic Module (AS) Product Formats Info |
Documentation | User Manual |