6 second to 20 minute 12Vdc timer board with choice of either INSTANT-ON, DELAYED OFF or DELAYED-ON AND HOLD operation with a relay output (C, NO, NC). Countdown starts when power is applied to the board. The relay changes state at the end of the user set delay period and remains in that condition until the power is removed.
Setting is quick and easy. The delay time is set using on-board jumpers and a trimpot. The number of "counts" made is set using a bank of nine possible jumper positions (8, 16, 32, 64, 128, .... to 8192). The trimpot allows you to tweak the time period for each "count" by about +/-0.5 Seconds. Another jumper sets the timing mode.
Timing range as supplied is from about 6 seconds to a maximum of two hours. Up to 22.7 hours is possible using different components for the RC network (not provided).
SpecificationsInput Voltage | Regulated 12Vdc (Order Code 660.446UK with connector 777.001UK or 777.001 is suitable) |
Current consumption | 15mA standby, <40mA active |
Delay Times Approx. (see text) | 6 seconds minimum 2 hours maximum |
Counting periods | 8, 16, 32, 64, 128, 256, 512, 1024, 4096 and 8192 |
Output modes | On-to-Off or Off-to-On |
Output Type | 1 x SPDT Relay |
Maximum Output Load (Resistive) | Up to 48Vac or 28Vdc @ 2 Amps max. (Relay Datasheet) |
Output Connections | NO, NC, C (Relay FAQ) |
Dimensions | 54 x 58 x 25mm |
Fixing Holes | 4x M3 |
Board Connections | Screw terminal blocks |
Product Formats | SELF-ASSEMBLY Electronic Kit (KT) or PRE-ASSEMBLED Electronic Module (AS) Product Formats Info |
Documentation | User Manual Diagram showing how to connect two 3152 together to get very long duration delays (up to 20 years with different RC values!) |