Available in 5V, 6V, 12V & 24V dc relay coil versions, these handy little relay boards use a small PCB to carry a mains rated SPDT relay with Common, Normally Open and Normally Closed connection options.
Electrical isolation is provided solely by the relay coil /contact interface (see relay datasheet for specifications). If your application requires a greater degree of electrical isolation then we recommend you use one of our opto-isolated relay boards instead.
The board includes a back-emf protection diode across the relay coil.
See order code 8045KT for a 2 channel version of this product.
SpecificationsInput Signal: | ||||
Input voltage (nominal) | 5V dc | 6V dc | 12V dc | 24V dc |
Input voltage (minimum) | 3.8 dc | 4.5V dc | 9.0V dc | 18V dc |
Input voltage (maximum) | 6.5V dc | 7.8V dc | 15.6V dc | 31.2V dc |
Current (relay active) | 73 mA | 60 mA | 30 mA | 15 mA |
Coil Impedance | 70 Ohm | 100 Ohm | 400 Ohm | 1,600 Ohm |
Board Output Rating: | ||||
Output Type | 1 x SPDT Relay | |||
Output Connections | NO, NC, C (Relay FAQ) | |||
Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 5 Amps max. per relay (Relay Datasheet) | |||
Relay Performance (at Initial Value): | ||||
Contact resistance | 100mOhm Max. @ 1A,6VD | |||
Operating time | 10 mSec. Max | |||
Release time | 5 mSec. Max | |||
Relay Dielectric Strength: | ||||
Between coil & contact | 1000Vac 50/60HZ (1 minute) | |||
Between contacts | 500Vac 50/60HZ (1 minute) | |||
Surge Resistance | 3,000V (between Coil & Contact 1.2x50uSec.) | |||
Relay ax. On/Off Switching: | ||||
Electrical | 30 Ops per Minute | |||
Mechanical | 300 Ops per Minute | |||
Overall dimensions (mm) | ~ 38Wx30Lx20H | |||
Fixing Holes | 4 x M3 | |||
Enclosure | WCAH2855 | |||
Board Connections | Screw terminal blocks | |||
Product Format | SELF-ASSEMBLY Electronic Kit (KT)Product Formats Info | |||
Documentation | User Manual (12V Version) |