Electronic Modules Information Pre-assembled electronic modules are normally supplied as pictured. You simple need to make the necessary connections.
Quasar Electronics Limited
Your Cart
Your Cart: Empty

Electronic Modules General Information

Product Format Information

PRE-ASSEMBLED Electronic Modules  Pre-Assembled Module

Pre-assembled electronic modules and circuit boards are normally supplied as shown in the main product image but please see individual product page descriptions for any details.

You just need to make any external connections that are required to the board. For example, a power supply, safety fuse, inputs, outputs, computer leads, motors, lights, etc.

Enclosures

You may wish to put the board into an enclosure. A suitable isolating enclosure is essential where the input or output voltage exceeds 50Vac or 75Vdc (see Mains Electricity section below).

Some electronic modules include an enclosure and others are available to purchase separately (see product page for details). Please refer to the Technical Specifications table to see if an appropriate size enclosure is available.

Please note that additional items required to house the module (like connection wires, connectors, fuseholders, screws, switches, etc.) must be supplied by the user. It may also be necessary to make holes for switches, ventilation, etc.

DIN-Rail Mountings

DIN-Rail mountings are available for some modules. Please refer to the product page Technical Specifications table to see if an appropriate size mounting is available.

Mains Electricity

WARNING: Some kits and modules operate at mains voltage and present an electric shock hazard that can cause severe and permanent injury or even death.

Modules connected to 110-240Vac mains voltage or indeed any input or output voltage that exceeds 50Vac or 75Vdc must be treated with extreme caution.

Construction, installation, testing and commissioning should only be performed by a competent person. These products are not suitable for children.

The following information provides general guidance on electrical safety but it is in no way complete.

Make sure installation complies with local regulations.

Many areas of the assembly (including heatsinks) may operate at mains voltage so it must be fitted into a suitable isolating enclosure.

Most mains modules require some additional components like mains leads, plugs, fuses, etc. Isolating enclosures are available for some of these modules. Where these are not available, you will need to provide your own enclosure and hardware.

To ensure electrical safety, and also protection from fire or personal injury, male sure your mains operated equipment complies with these safety hints:

  • Use a suitable isolating enclosure.
  • Use a power switch if the device consumes more than 10W. Use a double pole switch for mains operated, transformer-less kits.
  • Mount a fuse in series with the mains switch. Use a slow blow (T) 50mA fuse for transformers up to 10W and a 100mA fuse for transformers up to 20W.
  • Use a mains input connector, or a robust power cord with a clamp.
  • Internal wiring carrying mains voltages must have a minimum cross-sectional area of 0.5mm2.
Other Hazards to bear in mind
  • Electrical faults which could cause fire
  • Fire or explosion where electricity could be the source of ignition in a potentially flammable or explosive atmosphere

We accept no responsibility for injury, loss, or damage of any kind as a result of the purchase, assembly or use of any of our products.

 

Cookie Info

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience.

If you continue without changing these settings, you consent to this. If you want, you can change your settings at any time by visiting our cookies page.

More About Cookies

Main Menu
Banner Adverts
Velleman Whadda Cebek UK Main Dealer
© 2024 Quasar Electronics Limited, all rights reserved worldwide. E & OE.
Exec Time: 0.029577 Seconds Memory Usage: 3.582657 Megabytes