Two Zone Alarm System Kit Two Zone Alarm System Kit Default Manufacturer Simple to install, low cost yet highly functional microcontroller based security system that offers an effective security system for a range of properties. This alarm provides 2 independent zones (one delayed and one direct) and a backup battery charger circuit... Electronics > Circuit Components > Printed Circuit Boards > Development Boards smartkit_1197kt 1197KT View Offer Quasar Electronics Limited https://www.quasarelectronics.co.uk/Item/smart-kit-1197-two-zone-alarm-system
Location

Two Zone Alarm System Kit

Two Zone Alarm System Kit
Two Zone Alarm System Kit
Two Zone Alarm System Kit
Two Zone Alarm System Kit
1197KT - Two Zone Alarm System Kit
Ability Level 2: ModerateProduct Format : Self-Assembly Electronic Kit ( Soldering Required)
Ability Level 2 : Moderate

This product is discontinued - please see alternatives in parent category link shown above.

Simple to install, low cost yet highly functional microcontroller based security system that offers an effective security system for a range of properties. This alarm provides 2 independent zones (one delayed and one direct) and a backup battery charger circuit.

The entry and exit time as well as the alarm time are standard. Both zones have shortcut protection.

The system can also support a 12V/3Ah lead acid backup battery to maintain protection in the event of a power cut.

Features
  • 2 zones (one direct and one delayed)
  • Both zones work with normally closed (NC) contacts connected in series
  • Output for 2 sirens
  • Two LEDs to indicate system status
  • Charging output suitable for 12V/3Ah lead-acid backup battery

Kit includes all board mounted components and solder for assembly. Heatsink shown is not supplied.

Features
  • 2 zones (one direct and one delayed)
  • Both zones work with normally closed (NC) contacts connected in series
  • Output for 2 sirens
  • Two LEDs to indicate system status
  • Charging output suitable for 12V/3Ah lead-acid backup battery
Specifications
Input Voltage17Vac, 2 Amp mains transformer (not included)
Operating Voltage13.8V dc
Power consumption (idle)35mA
Maximum Output Load5 Amps
Exit Time15 Seconds
Delay Time10 Seconds
Alarm Duration30 Seconds
Board Dimensions80x95mm
Board ConnectionsSolder Posts
Product FormatSELF-ASSEMBLY Electronic Kit (KT) Product Formats Info
DocumentationUser Manual
Obsolete/Discontinued

You might also like . . .

Velleman K8093 - Home Alarm Kit with RF Receiver

A simple alarm control unit for the home or work place. Includes RF receiver module so alarm can be controlled remotely with optional transmitter...

£20.74 +VAT, £24.89 Inc
In Stock
1094KT - Home / Shop Alarm System Kit

A very good alarm system for houses and shops with professional specifications. It has adjustable entry and exit times and variable alarm duration...

1140KT - Five Zone Alarm System Kit

State-of-the-art security system. An integrated security system that consists of 5 independent zones. One Delay Zone, three Direct Zones and one for 24 hours protection zone...

£45.79 £38.92 +VAT, £46.70 Inc (Save 15%)
In Stock
Cebek AL-1 (CAL001) - House / Car Alarm Module

One zone alarm for building or vehicle with relay output. The alarm will sound for 3 minutes when the circuit is broken. The exit delay is preset at 15 sec. The entry delay is adjustable from 10 and 30 sec. The board is reverse polarity protected...

£13.53 +VAT, £16.24 Inc
In Stock
Cebek AL-10 (CAL010) - Burglar Alarm Module

Burglar alarm module that provides a simple but effective 12V alarm system for home, factory, office, garage, shed, etc...

£23.95 +VAT, £28.74 Inc
In Stock
Quasar Electronics Limited
Your Cart
Your Cart: Empty
Search
Categories
© 2017 Quasar Electronics Limited, all rights reserved worldwide.
Exec Time: 0.11887 Seconds Memory Usage: 6.04734 Megabytes