Good quality compact-sized high efficiency 150 Watt soft start power inverter to power 230Vac mains voltage equipment from a battery. 12V and 24V models available.
Modern electronics provide a stabilised output voltage with short-circuit and overload protection. Includes soft-start circuitry to protect equipment on power up.
Produces a modified sine wave output that is suitable for powering most equipment and is far superior to the square wave output provided by low quality inverters.
Please note: Ensure the device is well within the inverter output power rating. We recommend using an inverter capable of supplying a minimum of 3 times the device's rated power to avoid damage to the inverter by any current surge.
Please note: For equipment with inductive loads, voltage sensitive devices or audio equipment we recommend using one of our pure sine wave inverters which are more suitable for these devices.
Please note: The inverter will NOT operate high wattage appliances or equipment that produce heat, such as hair dryers, microwave ovens and toasters. Please refer to our Product Selection Guide for help choosing the correct wattage model for your application.
Supplied with a 800mm battery lead with crocodile clips.Features
|Model||SSI000 (12Vdc Input)||SSI001 (24Vdc Input)|
|DC input voltage||12Vdc nominal (10.8 - 15.5Vdc)||22Vdc nominal (21.6 - 31Vdc)|
|Output Voltage||230Vac ±10%, 50Hz||230Vac ±10%, 50Hz|
|Output Power||150W continuous||150W continuous|
|Maximum Surge||450W for 2 seconds||450W for 2 seconds|
|USB Output||5Vdc, 1.0A||5Vdc, 1.0A|
|DC No load current||<0.25A||<0.25A|
|DC Load current||15 Amps approx. @ 150 Watts||8 Amps approx. @ 150 Watts|
|Ambient Working Temperature||-15°C to +45°C||-15°C to +45°C|
|Supplied with||0.8m DC power lead with crocodile clips||0.8m DC power lead with crocodile clips|
|Cable Terminals||72mm Crocodile Clip + 6.4/12.0mm Ring||72mm Crocodile Clip + 6.4/12.0mm Ring|
|Dimensions||160 x 103 x 55mm||160 x 103 x 55mm|
|Documentation||SSI0xx Series User Manual|
Please ensure you select the correct voltage using the radio buttons below.