The Cebek TL-325 is a 100m range, 2-channel 433.92MHz RF transmitter board module for Cebek GROUP 3 remote control receivers.
Board is designed for building into fixed installations and is DIN-RAIL mountable using our C7564. Requires an external 12Vdc power supply. Channel control inputs accept volt free contact closure (e.g. push button or relay contact closure). Screw terminal blocks for connections.
The receiver memory is FIFO. Once you have programmed 5 transmitters, the next transmitter programmed will be placed in the memory slot used by the first one. The following one will substitute the memory originally allocated to the second and so on.
|Operating Voltage||12Vdc (Order Code CFE002 or CFE103 module)|
|Current Consumption||50mA transmitting|
|RF Frequency||433.92 MHz|
|Board Connections||Screw terminal blocks|
|Dimensions (WxDxH)||~ 72 x 64 x 18mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
|CTL310||1-Channel Momentary / Toggle / Timer Relay Receiver Module, 12/24Vdc|
|CTL311||2-Channel Momentary / Toggle / Timer Relay Receiver Module, 12/24Vdc|
|CTL312||1-Channel DIN Rail Momentary / Toggle / Timer RF Receiver, 230Vac|
|CTL601||2-Channel IP55 Momentary / Toggle / Timer RF Receiver Module, 12Vdc|
|CTL602||2-Channel IP55 Momentary / Toggle / Timer RF Receiver Module, 230Vac|
|CTL612||1-Channel Momentary / Toggle / Timer RF Receiver Module, 230Vac|
|CTL613||2-Channel Momentary / Toggle / Timer RF Receiver Module, 230Vac|
|NB Only one channel will operate if you use a 1-channel transmitter with a 2-channel receiver. You can use a 2-channel transmitter with two 1-channel receivers (see User Manual for details). You cannot simultaneously use two transmitters if they are operating in range of one another (regardless of their coding).|
2-Channel 12 or 24Vdc powered Momentary, Latching or Timer RF relay receiver module from our range of Group 3 433.92MHz single channel RF remote control modules. Mix and match to suit your needs...
2-Channel 12/24Vdc powered Momentary, Toggling/Latching or Timer 433.92MHz RF relay receiver module. Supplied pre-built in an IP55 rated enclosure. Relays have reset Inputs...
2-Channel 230Vac mains powered Momentary, Toggling/Latching or Timer 433.92MHz RF relay receiver module. Supplied pre-built in an IP55 rated enclosure. Relays have reset Inputs...
2 channel mains powered RF relay receiver module with Momentary, Toggling/Latching or Timer modes. It will recognise the signal sent from any Group 3 Cebek transmitter....