The Cebek TL-3 is a 230Vac mains powered 1-Channel RF receiver board with Momentary action relay and buzzer outputs. Part of our Group 1 range of 433.92MHz RF remote control modules that allow you to select from a variety of receiver and transmitter options to suit your needs (see compatibility table tab above).
The relay on this Momentary receiver module turns on only while transmitter button is pressed and disconnects immediately the button is released.
Any number of Group 1 transmitters and receivers can be set to either accept or ignore other modules within range using the 13,122 security code combinations.
|Operating Voltage||230Vac mains|
|Output||1 x SPDT Relay|
|Up to 240Vac or 28Vdc @ 3 Amps max. (Relay Datasheet)|
|Relay Connections||NO, NC, C (Relay FAQ)|
|Dimensions (mm)||108 x 56 x 30|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
|WARNING||Product operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info|
|Documentation||Cebek TL-3 User Manual|
|CTL005||1 Channel Remote Control Transmitter, 30m|
|CTL006||2 Channel Remote Control Transmitter, 30m|
|CTL011||1 Channel Remote Control Transmitter, 100m|
|CTL012||2 Channel Remote Control Transmitter, 100m|
|CTL013||1 Channel Remote Control Transmitter, 300m|
|CTL014||2 Channel Remote Control Transmitter, 300m|
|CTL015||2 Channel Remote Control Transmitter Module, 100m|
|CTL016||2 Channel Remote Control Transmitter Module, 300m|
|NB Only one channel will operate if you use a 1-channel transmitter with a 2-channel receiver. You can use a 2-channel transmitter with two 1-channel receivers (see User Manual for details). You cannot simultaneously use two transmitters if they are operating in range of one another (regardless of their coding).|