Buy Cebek R-46 Electronic Module (Pre-Assembled)
12Vdc, 4 output cyclical Day/Night lighting controller providing a repeating virtual-day simulation effect (Sunrise-Day-Sunset-Night) with user adjustable times. Each output is active at different parts of the virtual day and rated for loads of up to 4 Amps. Suitable for LED strips and incandescent bulbs. Can be used to power a different lighting circuit, providing flexibility for producing virtual day and night scenes in nativity scenes, models, shop displays, etc.
Four x 4 Amp outputs provide control of lighting based on different periods of the day:
The Sunrise/Sunset transition time is user adjustable providing a fast or gradual transition in lighting intensity. The length of the Day/Night phases of the day cycle are also user adjustable.
The shortest duration one "day" can be set to is 4 seconds and the longest day duration possible is 8 hours.
The Auxiliary Outputs are active during the respective Day or Night part of the cycle.
The Start Point setting allows selection of the desired initial state (either Daybreak, Day, Nightfall or Night) when power is applied
The module is supplied fully assembled and has an onboard safety fuse. All you need to do is house it in a suitable enclosure, add the wiring, output fuses and lights.
Suitable for use with conventional incandescent filament light bulbs and 12V LED strips only. NOT SUITABLE for use with inductive loads e.g. LED bulbs, transformers, etc.
|Maximum Load (per output)||4 Amps|
|Current Consumption||80mA max (control electronics only)|
|Outputs (see image |
above for graphical
|A. Full Day Cycle (Dawn - Day - Dusk - Night)|
B. Full Night Cycle (Dusk - Night - Dawn - Day)
C. Day Phase (Steady on 80% of full cycle)
D. Night Phase (Steady on 20% of full cycle)
|Ramp Time Adjustment||1-120 Seconds or 1-120 Minutes|
|Solid Time Adjustment||1-120 Seconds or 1-120 Minutes|
|Dimensions||132 x 107 x 35 mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
|Documentation||Cebek R-46 User Manual|