DC Motor Push-Button Controller Module, 8-30V, 25A DC Motor Push-Button Controller Module, 8-30V, 25A Cebek This push-button operated DC motor speed controller uses a PWM triac output and allows you to adjust the speed of single-phase, universal DC motors with 8 - 30V dc supply and an operating load of up to 25 Amps... Electronics > Circuit Components > Printed Circuit Boards > Development Boards cebek_r_33 R-33 57.37 Quasar Electronics Limited https://www.quasarelectronics.co.uk/Item/cebek-r-33-dc-motor-push-button-speed-controller-module-8-30v-25a
Location
Home > Electronic Kits & Modules > Motor Controller - Driver Kits > DC Motor Speed Controller Circuit Boards > Cebek R-33 (CR033) - DC Motor Push-Button Controller Module, 8-30V, 25A

DC Motor Push-Button Controller Module, 8-30V, 25A

Cebek R-33 (CR033) - DC Motor Push-Button Controller Module, 8-30V, 25A
Cebek R-33 Electronic Module (Pre-Assembled)
Cebek Electronic Modules

This push-button operated DC motor speed controller uses a PWM triac output and allows you to adjust the speed of single-phase, universal DC motors with 8 - 30V dc supply and an operating load of up to 25 Amps.

Motor speed adjustment is achieved using either a single or pair of push-button switches (not included). The speed of the progression between minimum and maximum output power is user adjustable from 2 to 15 seconds.

In two-button mode the circuit provides immediate and complete activation / deactivation if buttons are pushed and held. The circuit also features a memory that allows the motor to be returned to a previously set speed.

In single-button mode the output will cycle from fully on to fully off. A fast button press will completely activate / deactivate depending on where it is in the cycle.

Please see User Manual below for full description.

PRODUCT SELECTION NOTES: This module can be used to control DC resistive loads like lights, machinery pedals, universal motors, digital control in panel lighting, modelling, etc… . It is NOT suitable for use with inductive loads like neon's, halogen lamps, transformers, etc,.. The motor controller should have an output load capacity at least 25% above the motors peak power requirement. Please do NOT rely on motor rating plates for power consumption figures as they often quote average not peak power. You should verify the actual peak power at start-up and under full load before selecting an appropriate size motor controller.

Please see CR023 for an 8A version of this product.

Specifications
Operating Voltage8V - 30V dc
Output Load25.0A maximum
Module Power Consumption30 - 150mA
Operation Time (0-100%)2 Sec min - 15 Sec max.
Polarity ProtectionYes
Board Dimensions (mm)~ 121 X 107 X 55 mm
Product FormatPRE-ASSEMBLED Electronic Module Product Format Info
Item Number:
Cebek R-33 (CR033)
Total Price:
£47.81 +VAT, £57.37 Inc
Stock Info:
In Stock
Your Total:
Quantity:

You might also like . . .

Cebek R-23 (CR023) - DC Motor Push-Button Controller Module, 8-30V, 8A

This push-button operated DC motor speed controller uses a PWM triac output and allows you to adjust the speed of single-phase, universal DC motors with 8 - 30V dc supply and an operating load of up to 8 Amps...

£29.88 +VAT, £35.86 Inc
In Stock
Cebek R-35 (CR035) - DC Motor Controller (DC Signal/Pot) Module, 8-30V, 25A

This external signal (0-10Vdc) or potentiometer operated DC motor speed controller uses a PWM triac output and allows you to adjust the speed of single-phase, universal DC motors with 8 - 30V dc supply and an operating load of up to 25 Amps...

£47.81 +VAT, £57.37 Inc
In Stock
Quasar Electronics Limited
Your Cart
Your Cart: Empty
Search
Categories
© 2017 Quasar Electronics Limited, all rights reserved worldwide.
Exec Time: 0.111486 Seconds Memory Usage: 5.965607 Megabytes