Dusk/Dawn Effect Lighting Controller Module, 230Vac 50Hz, 1500W Dusk/Dawn Effect Lighting Controller Module, 230Vac 50Hz, 1500W Cebek 230Vac, 1500 Watt Dusk/Dawn Effect Lighting Controller Module will progressively adjust lighting brightness over a user set time period to mimic either Sunrise>Day (Day Effect) or Sunset>Night (Night Effect)... Electronics > Circuit Components > Printed Circuit Boards > Development Boards cebek_r_13 R-13 27.02 Quasar Electronics Limited https://www.quasarelectronics.co.uk/Item/cebek-r-13-dusk-dawn-effect-lighting-controller-module-230vac-1500w
Location
Home > Electronic Kits & Modules > Light Effect - Controller Kits > Dusk Dawn Lighting Simulator Modules > Cebek R-13 (CR013) - Dusk/Dawn Effect Lighting Controller Module, 230Vac 50Hz, 1500W

Dusk/Dawn Effect Lighting Controller Module, 230Vac 50Hz, 1500W

Cebek R-13 (CR013) - Dusk/Dawn Effect Lighting Controller Module, 230Vac 50Hz, 1500W
Cebek R-13 Electronic Module (Pre-Assembled)
Cebek Electronic Modules

The Dusk/Dawn Effect Lighting Controller Module (230Vac 50Hz, 1500W) will progressively adjust lighting brightness over a user set time period to mimic either sunrise (Day Effect) or sunset (Night Effect).

The two operating modes (Day Effect/Night Effect) provide a progressive regulation of the output voltage from completely Off-to-On or On-to-Off.

The length of time for the Dawn/Dusk part of the cycle is user adjustable between 1 Second and 120 Minutes thus providing a gradual transition in lighting intensity.

The Day/Night Effect input (simple contact closure) allows the user to switch the unit between the Day or Night cycles. Activating the Day Effect input will initiate the sunrise/day cycle. It will remain in the "day" state (fully on) indefinitely. Releasing the Day Effect input and activating the Night Effect input will initiate the sunset/night cycle. It will then remain in the "night" state (fully off) indefinitely or until the Day Effect is initiated.

The Day/Night Effect input can be connected to the relay output of a cyclical timer (CI010/11/12 or CI110/11/12, 3141 or 1180) for automatic and continuous switching between Day and Night cycles with quiescent adjustable times provided by the timer to produce a cyclical virtual day effect.

The following adjustments/controls are available to the user:

  • dusk/dawn transition period (Ramp) settable from 1 Second to 120 Minutes
  • Day/Night Effect input selects which cycle is activated
  • Day/Night Effect input can be connected to produce a virtual-day effect
  • Reset input to restart the cycle from initial state as determined by the Day/Night Effect input

Useful in a variety of applications including poultry-farming, design studios, security and safety lighting and children's bedrooms.

The module is supplied fully assembled and has an onboard safety fuse and LED 'On' indicator. All you need to do is house it in a suitable enclosure, add the wiring, switches and lights.

Suitable for use with conventional incandescent filament light bulbs only. NOT SUITABLE for use with inductive loads or other types of bulbs e.g. fluorescent, CFL, halogen, transformer, etc.

Features
  • dusk/dawn transition period (Ramp) settable from 1 Second to 120 Minutes
  • Day/Night Effect input selects which cycle is activated
  • Day/Night Effect input can be connected to produce a virtual-day effect
  • Reset input to restart the cycle from initial state as determined by the Day/Night Effect input
Specifications
Operating Voltage230Vac 50Hz mains
Current consumption35mA min. - 130mA max.
Output Load1500 Watts maximum
Output Load (Minimum)50 Watt minimum
Delay timing period1 Sec. - 2 hours
Dimensions72 x 98.75 x 45 mm
DIN Rail MountC7567
EnclosureWCAH2852
Product FormatPRE-ASSEMBLED Electronic Module Product Format Info
WARNINGProduct operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info
Item Number:
Cebek R-13 (CR013)
Your Price:
£22.52 +VAT, £27.02 Inc
Stock Info:
In Stock
Your Total:
Quantity:

You might also like . . .

Cebek R-11 (CR011) - Dusk/Dawn Effect Lighting Controller Module, 230Vac 50Hz, 750W

230Vac, 750W Dusk/Dawn Effect Lighting Controller Module (230Vac 50Hz, 750W) will progressively adjust lighting brightness over a user set time period to mimic either sunrise/day (Day Effect) or sunset/night (Night Effect)...

£19.45 +VAT, £23.34 Inc
In Stock
Cebek R-15 (CR015) - 2 Output Cyclical Night/Day Lighting Controller (230Vac 50Hz, 500W

230Vac 2-Output Cyclical Night/Day Lighting Controller provides a continuous virtual day effect (Dawn-Day-Dusk-Night) for use in a variety of applications including hydroponics', poultry farming, nativity models, etc...

£38.10 +VAT, £45.72 Inc
In Stock
Cebek R-16 (CR016) - 4 Output Cyclical Night/Day Lighting Controller (230Vac, 500W)

230Vac, 4 output cyclical Day/Night lighting controller providing a repeating virtual-day simulation effect (Sunrise-Day-Sunset-Night) with user adjustable times. Each output is active at different parts of the virtual day and rated for loads of up to 500 Watts...

£45.26 +VAT, £54.31 Inc
In Stock
Cebek R-43 (CR043) - Dimmer Night / Day Effect LED Strip Lighting Controller (12Vdc, 8A)

12Vdc 8 Amps Dusk Dawn Effect Lighting Controller Module will progressively adjust lighting brightness over a user set time period to mimic either sunrise<day (Day Effect) or sunset>night (Night Effect)...

£32.20 +VAT, £38.64 Inc
In Stock
Cebek R-113 (CR113) - Virtual Day Lighting Simulator Module, 230Vac 50Hz, 1500W

The Virtual Day Lighting Simulator Module (230Vac 50Hz, 1500W) is a flexible controller that provides a Dawn-Day-Dusk-Night lighting effect for use in a variety of applications...

£29.47 +VAT, £35.36 Inc
In Stock
Quasar Electronics Limited
Your Cart
Your Cart: Empty
Search
Categories
© 2017 Quasar Electronics Limited, all rights reserved worldwide.
Exec Time: 0.116574 Seconds Memory Usage: 6.120346 Megabytes