Cebek P-5 is a general purpose, low noise stereo audio pre-amplifier built around a TL072 JFET dual operational amplifier IC.
On-board trimmers allow you to independently adjust the gain of each channel.
SpecificationsOperating Voltage | 12 - 24Vdc (18Vdc Nom.) |
Current Consumption | Minimum: 2mA Maximum: 15mA |
Suitable Power Supply | CFE103 or CFE006 |
Input Signal | Minimum: 5mV Maximum: 100mV |
Input Impedance | 10K Ohm |
Output Impedance | 1K Ohm |
THD | 0.05% Max. |
Gain | 46db |
S/N Ratio | 60dB |
Frequency Response | 20 - 20000Hz |
Board Connections | Screw terminal block & blade terminals |
Dimensions (WxDxH) | ~ 72 x 54 x 20mm |
Weight | 38g |
Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |