The Cebek L-2 module is a 3 Channel sound to light circuit covering High, Medium and Low frequencies. Simply connect to the speaker output of a 1 to 5W amplifier and each channel will respond according to the rhythm of the music.
Triac's are used to switch the 230Vac, 500W outputs and are suitable for use with resistive loads like conventional incandescent filament light bulbs only.rated up to 500W.
This module is designed for use with conventional incandescent filament light bulbs only. It is NOT suitable for use with inductive loads or other types of bulbs e.g. fluorescent, CFL, halogen, transformer, etc.
|Power Consumption||Minimum: 100mA|
Maximum: According to load
|Maximum: 500 Watts|
Minimum: 50 Watts
|Output Frequency||Low: 200 Hz|
Mid: 1000 Hz
High: 3000 Hz
|Input Signal||Maximum: 5W RMS|
Minimum: 1W RMS
|Input Impedance||4 - 8 Ohms|
|Board Connections||Screw terminal blocks|
|Board Dimensions (WxDxH)||~ 125 x 82 x 20 mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
|WARNING||Product operates at mains voltage and is not suitable for children. An isolating enclosure is required (not included). Installation, testing and commissioning should be performed by a competent person. Mains Electricity Info|