2-channel sequential delay timer relay module with independently settable delay periods from 1 - 180 seconds. Communication I/O connections to daisy chain multiple units. Mains rated relay outputs. Start and Reset switch inputs. Instant-on option.
The module can be activated by the Start Input (using for example a push button or relay contact closure) or by selecting the Instant-On option so it initiates on powering up.
On activation Relay 1 turns on for a user-adjustable delay period. On completion, Relay 1 turns off and Relay 2 turns on for a second user-adjustable delay period. When relay 2 turns off the unit returns to its standby state. A fresh Start Switch input is required to repeat the cycle. This can be performed manually or automatically if you connect the Start Switch input to the relay output of a cyclical timer (e.g. CI010/11/12 or CI110/11/12, 3141 or 1180). This setup provides automatical and continuous retriggering of the CI027 with a user adjustable pause time provided by the cyclical timer to produce a repeating on/off/pause/on/off/pause/etc. effect.
Both delay periods are independently settable from 1 - 180 seconds using the onboard potentiometers (header pins allow the use of user-supplied external potentiometers if required).
A Reset Switch input immediately stops the timing sequence, turns off the active relay and returns the module to its standby state.
Each board has a communication input and output that allows several boards to be daisy chained together in series.
The module has no memory function and will always start from the relay 1 position when first activated.
You can also use this board for reversing a DC motor.Specifications
|Power Supply||12V dc (e.g. Order Code 660.446UK with connector 778.106 or CFE123 module)|
|Current Consumption||25 - 80mA max|
|Minimum Delay Time/Relay||1 second|
|Maximum Delay Time/Relay||180 seconds|
|Output||2 x SPDT Relays|
|Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet)|
|Relay Connections||NO, NC, C (Relay FAQ)|
|Protection against Inverse Polarity||Yes|
|Board Connections||Screw terminal blocks & header pins|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|
High quality Erp Compliant energy efficient fixed 12V regulated 1000mA max...
Multipurpose black ABS plastic enclosure approx. 130 x 68 x 44mm that can be used to house a number of suitable size kits and modules...
Nominal 12Vdc, 600 mA stabilised power supply module complete with an onboard 230Vac mains transformer. The module provides a stabilised, adjustable (10-15V) output with short circuit protection, onboard fuse, LED 'On' indicator and screw terminal blocks ...
This module has 4 relay outputs that operate sequentially using a choice of manual or automatic triggering. With each trigger signal the module receives, the relays are individually activated (stepped) in sequence. As the next relay activates, the previou...
2-channel sequential delay timer relay module with independently settable delay periods from 2 to 45 minutes. Daisy chain multiple units…
This module has 8 relay outputs that operate sequentially using a choice of manual or automatic triggering. With each trigger signal the module receives, the relays are individually activated (stepped) in sequence. As the next relay activates, the previou...
This highly configurable module has 8 relay outputs and is expandable to 256 with additional units as detailed below. With each internal or external impulse the module receives, a relay will be activated in sequence. As the next relay activates, the previ...
This expansion module provides an additional 4 relay outputs for the CI057 8 Channel Sequential Relay Controller Module which can be expanded to a maximum of 256 channels...
This expansion module provides an additional 8 relay outputs for the CI057 8 Channel Sequential Relay Controller Module which can be expanded to a maximum of 256 channels...