The CAL009 Motorbike Alarm Module is specially designed for use with 12V motorbikes. It uses an onboard vibration sensor to trigger a two-stage alarm. A relay output can drive a horn or siren.
If movement is sensed the output is automatically activated for 29 seconds. After this time the output is deactivated and the circuit remains in quiescent mode. If the sensor detects another movement the output is triggered again. To turn off after the 2nd activation, the power must be removed from the module.
The output can be set to continuous or intermittent operation.
|Operating Current||58 mA|
|Alarm ON Time||29 Sec (1st trigger), continuous (2nd trigger)|
|Relay Rating||5 Amps maximum current|
|Dimensions (WxDxH)||~ 67 X 40 X 30 mm|
|Product Format||PRE-ASSEMBLED Electronic Module Product Format Info|