6 second to 20 minute 12Vdc timer board with choice of either "instant-on delayed off" or "delayed-on and hold" operation with a relay output (C, NO, NC). Countdown starts when power is applied to the board. The relay changes state at the end of the user set delay period and remains in that condition until the power is removed.
An on-board jumper selects the operation mode.
The delay time is quick and easy to set using a series of on-board jumpers and a trimpot. The number of "counts" made is set using a bank of nine possible jumper positions (8, 16, 32, 64, 128, .... to 8192). A trimpot allows you to set the time period for each "count".
Timing range as supplied is from about 6 seconds to a maximum of two hours. Up to 22.7 hours is possible using different components for the RC network (not provided).Specifications
|Input Voltage||Regulated 12Vdc (Order Code 660.446UK and connector 778.106 or 777.001 is suitable)|
|Current consumption||15mA standby, <40mA active|
|Delay Times Approx.|
|6 seconds minimum|
2 hours maximum
|Counting periods||8, 16, 32, 64, 128, 256, 512, 1024, 4096 and 8192|
|Output modes||On-to-Off or Off-to-On|
|Output Type||1 x SPDT Relay|
|Up to 48Vac or 28Vdc @ 2 Amps max. (Relay Datasheet)|
|Output Connections||NO, NC, C (Relay FAQ)|
|Dimensions||54 x 58 x 25mm|
|Fixing Holes||4x M3|
|Board Connections||Screw terminal blocks|
|Product Formats||SELF-ASSEMBLY Electronic Kit (KT) or|
PRE-ASSEMBLED Electronic Module (AS) Product Formats Info
Diagram showing how to connect two 3152 together to get very long duration delays (up to 20 years with different RC values!)
K2579 Universal Start/Stop Timer electronic kit is a miniature relay timer for applications requiring a turn-off delay of up to 15 minutes. Delay time is user adjustable...
1 second to 20 minute 12Vdc push button activated delay timer board with reset button and a relay output. The relay is activated when the START button is pressed and turns off either after time-out or by pressing RESET...
This board provides a 12Vdc output that drops to 0V immediately the 'START' button is pressed and returns to 12V at the end of the timing period...
Adjustable 12Vdc ON-OFF cyclic timer modules with relay output allowing switching of any load up to 230Vac, 5A. Ideal for use in automation circuits, flashing or traffic lights, models, outdoor / indoor (hydroponics) crop growing, etc...