This board uses an LDR and built-in hysteresis of the 741 op-amp IC circuitry to eliminate the problem of relay chatter at the trigger threshold. This allows the switch to operate effectively where there is a gradual light change (i.e. dawn and dusk).
The Light/Dark mode switch is used to select either light or dark activation of the relay. This enables the unit to be operated in its low-current standby mode for the majority of the time according to your application.
|Supply Voltage||Regulated 10 - 15Vdc|
|Current consumption||Light Activated: <1.5mA standby, <46mA relay active|
Dark Activated: <2mA standby, <45mA relay active
|Output Type||1 x SPDT Relay|
|Up to 48Vac or 28Vdc @ 2 Amps max.(Relay Datasheet)|
|Output Connections||NO, NC, C (Relay FAQ)|
|Board Dimensions||~ 37 x 61 x 20mm|
|Fixing Holes||4 x M3|
|Board Connections||Screw terminal blocks|
|Product Formats||PRE-ASSEMBLED Electronic Module (AS) Product Formats Info|
MK125 Light Sensitive Switch electronic kit automatically switches on at dusk and turns off at dawn...
This circuit uses a simple LDR based circuit in super-Darlington set-up to turn on the relay output. A Light/Dark mode switch is used to select either light or dark activation of the relay...
This kit uses the LDR and Schmitt trigger circuitry to eliminate the problem of relay chatter at the trigger threshold so that the circuit can be used where the change in light with be small and gradual...
12Vdc light activated detector module with adjustable sensitivity and mains rated relay output allowing switching of loads up to 230Vac, 5A. The relay is activated when the light level falling on the detector board rises above a user set threshold. The rel...