K8068 - Dimmer for Electronic Transformers KIT (110/230Vac)

The K8068 Dimmer for Electronic Transformers SELF-ASSEMBLY electronic kit is a 'PLUG-IN' board for use with our home modular light system K8006 and is suitable for incandescent lamps, mains voltage halogen lighting and low voltage halogen lighting in combination with an electronic transformer.

Also available in PRE-ASSEMBLED Electronic Module format (Order Code VM131).

• 'PLUG-IN' module for use with our home modular light system K8006
• suitable for incandescent lamps, mains voltage halogen lighting and low voltage halogen lighting in combination with an electronic transformer (transformer types: HET60 (60W), HET105 (105W), HET150 (150W))
• inductor- and filter free, phase control technology with coolMOS™ FET-transistor
• a brief push toggles on/off, while continued pushing engages dimming action
• 'soft-start' feature to make lamps last as long as possible
• non volatile memory for last set light intensity
• reduced harmonic distortion (less EMI), according to EN55015
• LED status and error indication

• operating voltages: 110-125V or 220-240V AC (50/60Hz)
• max. load: 300W/230V or 150W/115V, 0-98% adjustable
• dimming cycle speed: +/- 5 sec
• PCB dimensions: 65 x 57 x 20mm (2.5" x 2.2" x 0.8")
• Product format: SELF-ASSEMBLY electronic kit (KT more)
• WARNING! This product operates at potentially lethal mains voltage. Construction, installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children. more

• Dimmer Selection Guide
• Illustrated Assembly Manual k8068
• Assembly Manual k8068_rev1