1132 - Super 3-Channel Music to Light Effect, 230Vac Mains

Offers very impressive light effects thanks to very good channel separation between the low, medium and high frequency signals. Each of the three channels can drive mains voltage loads of up to 1000 Watts.

Easily connects to any audio amplifier with 1 to 100 Watts output power or other suitable audio signal. Uses three opto-couplers to completely isolate the mains voltages from the audio source.

Input sensitivity is adjustable. An onboard transformer provides power to the DC control circuitry.

Kit includes all board mounted components, transformer, heatsinks and solder for assembly.

The module is designed for use with conventional incandescent filament light bulbs only. NOT suitable for use with inductive loads or other types of bulbs e.g. fluorescent, CFL, halogen, etc.

Technical Specifications
Operating voltage:	230Vac/50Hz Mains
Power output per channel	1000W (peak) @ 230Vac mains
Input signal level	2.5V to 28V AF
Circuit power consumption	4VA AC
Input impedance	500K Ohm
Filter frequency responses	LOW: 10 Hz - 160 Hz MIDDLE: 350 Hz - 850 Hz HIGH: 1.8 kHz - 12 kHz
Board Dimensions	112 x 102 x 30 mm
Enclosure	WCAH2852
Board connections	Solder posts
Product Format	SELF-ASSEMBLY Electronic Kit (KT ) only more
Documentation	User Manual
WARNING!	This product operates at potentially lethal mains voltage. Construction, installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children. more