1117 - TV Pattern Generator (CCIR)

A pattern generator is a very useful instrument for the correct alignment of the timing circuits of a television set.

This CCIR Standard Bar Generator will produce horizontal and vertical stripes (bars) on the TV screen that enable you to align the vertical and horizontal scanning synchronisation circuits of the receiver.

This pattern generator follows the CCIR standards and produces RF signals in the VHF band. It is NOT suitable for use with North American NTSC standard televisions.

Kit version includes solder for assembly.

Technical Specifications
Working voltage	9Vdc i.e. PP3 battery (Order Code 656.020), kit 1061 or mains adapter (Order Code PSU375 with connector 778.106)
Current drawn	2mA
Fundamental Frequency	170 - 250 MHz (VHF Band)
Harmonics Frequencies	1st @ 350MHz (Band IV) 2nd, 3rd & 4th @ 525.7MHz and 875MHz (UHF Band)
Horizontal scan frequency	16,525 Hz
Vertical scan frequency	50 Hz
Output impedance	75 Ohm
Board Connections	Solder Posts
Product Formats	SELF-ASSEMBLY Electronic Kit (KT ) or PRE-ASSEMBLED Electronic Module (AS) more
Documentation	User Manual