RPI578 - 150W Power Inverter (24Vdc to 230Vac)

Regulated 150 Watt inverter to power 220V-230Vac equipment via a 24V vehicle or boat battery. This High performance (> 90%) power inverter generates very little heat. The high stability of the output frequency (±1%) makes it equally suitable to power sensitive devices.

Suitable for powering electrical equipment such as videos, very small portable TVs under 12" (use RPI585 for larger portable TV's), lamps, pumps and battery chargers, etc. We recommend the SSI620 or SSI626 for inductive loads like motor driven appliances (electric drills, fridges, freezers, etc.) as these can have considerably higher start-up/load currents than their rated value would indicate.

This inverter generates a modified sine wave, which although not perfect, is considerably superior to the square waves which are produced by most other inverters. Operating temperature range is from -15°C to 55°C.

• Produces an audible warning signal when the battery voltage is lower than 21V. The inverter automatically shuts off when the battery voltage drops below 20V
• Protection - Input short circuit & Over heating (55°C). Fuse protected input circuitry
• Modified sine wave

Technical Specifications
Continuous power	150W Maximum
Peak power	450W Maximum
Output voltage	230Vac (±10%)
Waveform	Modified sine
AC frequency	50Hz (±1%)
Efficiency	85-90%
Dimensions	162 x 104 x 58mm
Weight	0.7kg

• Power Power Inverter Selection Guide
• The output is to a BS1363 Standard 3-pin style mains socket (see picture) as used in United Kingdom, Ireland, Hong Kong, Malaysia and Singapore (NOT THE EUROPEAN SOCKET SHOWN!)
• NB This voltage inverter is NOT suitable for use in North America