1A SPDT Relay Specifications

Important Safety Notes

Please note that the current and voltage ratings detailed below relate to the relay only. They do not apply to the PCB connecting tracks which have a significantly lower current and voltage rating. Please ensure that the load does not exceed that recommended in the product documentation.

For safety we recommend that each relay output is used to switch resistive loads of up to 110Vdc or 24Vdc @ 1 Amps maximum (unless otherwise stated in the product description/User Manual).

WARNING: Connecting relay outputs to potentially lethal mains voltages! Where mains rated relay outputs are to be connected to mains voltages (check User Manual for suitability) all relevant electrical safety precautions and requirements should be observed. The installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. The finished product must comply with all relevant health and safety requirements. more

Relay Data Sheet

For full technical details on the AZ relay range please refer to the:

• Manufacturers Data Sheet

Basic Relay Help

If you are new to relays please read our:

• Basic Relay Fact Sheet