CTL020 - RF Remote Control Modules (4 and 8 Channel)

This range of 433.92MHz four (expandable to 8) channel RF remote control modules allows you to select from a variety of receiver board and transmitter options to suit your needs.

The four channel receiver modules are available with either Standard or Flip-Flop control of the four 3A mains rated relay outputs (C, NO, NC). They are designed to receive and decode signals sent by a 100m range four channel transmitters module.

Both receiver boards has an optional extension board to give a total of eight channel and an 8 button 100m transmitter unit is also available.

The Standard receiver modules activate the relay output at the push of the transmitter button and disconnect when the button is released. The Flip-Flop Relay Receiver modules activate the relay output at the first push of the transmitter button and will only disconnect after a second push of the button.

The modules have in-built micro-switches to select the code, antenna output, LED and acoustic signal for the output.

See also 1 Channel RF Remote Control Modules and 2 Channel RF Remote Control Modules

• Supplied in as a fully assembled module
• Suitable power supply for 12V units: Order Code PSU445 with connector 778.106 or kit 1061

Order Code	Description	PDF	Image
CTL022	4 Channel Standard Relay Receiver (12Vdc)
CTL023	4 Channel Flip-Flop Relay Receiver (12Vdc)
CTL024	Extension Unit for 4 Channel Standard Relay Receiver
CTL025	Extension Unit for 4 Channel Flip-Flop Relay Receiver
CTL020	4 Channel Remote Control Transmitter (100m)
CTL021	8 Channel Remote Control Transmitter (100m)