CTL020 - RF Remote Control Modules (4 and 8 Channel)

This range of 433.92MHz four (expandable to 8) channel RF remote control modules allows you to select from a variety of receiver board and transmitter options to suit your needs.

The four channel receiver modules are available with either Standard or Toggle control of the four 3A mains rated relay outputs (NO, NC, C). They are designed to receive and decode signals sent by a 100m range four channel transmitters module.

Both receiver boards have an optional extension board to give a total of eight channel and an 8 button 100m transmitter unit is also available.

The Standard Receiver modules activate the relay output at the push of the corresponding transmitter button and disconnect when the button is released.

The Toggle Receiver modules activate the relay output at the first push of the corresponding transmitter button and will only disconnect after a second push of the button.

Any number of transmitters and receivers can be set to either accept or ignore other modules within range using the 13,122 security code combinations.

The modules have in-built micro-switches to select security code, antenna output, LED relay status indicators.

Please see User Manual links in table below for full details.

See also 1 Channel RF Remote Control Modules and 2 Channel RF Remote Control Modules.

• Supplied in as a fully assembled module
• Suitable power supply for 12V units: Order Code PSU446 with connector 778.106 or kit 1061

Order Code	Description	Dimensions (mm)	PDF	Image
CTL022	4 Channel Standard Relay Receiver (12Vdc)	107 x 97 x 30
CTL023	4 Channel Toggle Relay Receiver (12Vdc)	119 x 97 x 30
CTL024	Extension Unit for 4 Channel Standard Relay Receiver	107 x 97 x 30
CTL025	Extension Unit for 4 Channel Toggle Relay Receiver	119 x 97 x 30
CTL020	4 Channel Remote Control Transmitter (100m)	106 x 61 x 24
CTL030	4 Channel Remote Control Transmitter (300m)	106 x 61 x 24
CTL021	8 Channel Remote Control Transmitter (100m)	106 x 61 x 24