CTL002 - RF Remote Control Modules (2 Channel)

This range of 433.92MHz two channel RF remote control modules allows you to select from a variety of receiver board and transmitter options to suit your needs.

There are 4 receiver module options featuring 12Vdc or 230Vac supply voltages and either Standard or Flip-Flop control of the two 3A mains rated relay outputs (C, NO, NC). These are designed to receive and decode signals sent by a choice of either 30m or 100m range transmitters modules.

The Standard receiver modules activate the relay output at the push of the transmitter button and disconnect when the button is released. The Flip-Flop Relay Receiver modules activate the relay output at the first push of the transmitter button and will only disconnect after a second push of the button.

The modules have in-built micro-switches to select the code, antenna output, LED and acoustic signal for the output.

See also 1 Channel RF Remote Control Modules and 4 (8) Channel RF Remote Control Modules.

• Supplied in as a fully assembled module
• Suitable power supply for 12V units: Order Code PSU445 with connector 778.106 or kit 1061

Part Number	Order Code	Description	PDF	Image
TL-2	CTL002	2 Channel Standard Relay Receiver (12Vdc)
TL-8	CTL008	2 Channel Flip-Flop Relay Receiver (12Vdc)
TL-4	CTL004	2 Channel Standard Relay Receiver (230Vac)
TL-10	CTL010	2 Channel Flip-Flop Relay Receiver (230Vac)
TL-6	CTL006	2 Channel Remote Control Transmitter (30m)
TL-12	CTL012	2 Channel Remote Control Transmitter (100m)