Mono Audio Pre-Amplifier Module Range

A selection of mono audio preamp modules that run from a 6-18V dc power supply (for example our CFE002) and have an onboard potentiometer for gain adjustment.

Model CPM001: Microphone Preamp Module (47K Ohm HIGH Impedance). Designed for use with low and high impendence microphones.

Model CPM002: Microphone Preamp Module (560 Ohm Low Impedance). Designed for use with low and high impendence microphones.

Model CPM004: General Purpose Preamp Module (10K Ohm Impedance). Designed as a general purpose preamp module.

Model CPM007: Guitar Preamp Module (22K Ohm Impedance). Designed for use as a preamp for electric guitars.

These modules can be used with Mono Pre-Amplifier Module with Tone Controls (CPM005).

All modules are supplied fully assembled and tested with instructions so you only need to make the necessary connections.

Technical Specifications
47K Ohm Input Impedance	CPM001 User Manual
Supply Voltage	6-18V dc (e.g. CFE002)
Current Consumption	2mA min. - 10mA max.
Input Impedance	47K Ohms
Signal Input	5mV min. - 300mV max.
Output Signal	2V max.
Output Impedance	1K Ohm
S/N Ratio	80 dB
Frequency Response	30Hz – 17KHz
Distortion	0.05% max.
Dims. (HxWxD)	50 x 35 x 20 mm
560 Ohm Input Impedance	CPM002 User Manual
Supply Voltage	6-18V dc (e.g. CFE002)
Current Consumption	2mA min. - 10mA max.
Input Impedance	560 Ohms
Signal Input	5mV min. - 300mV max.
Output Signal	2V max.
Output Impedance	1K Ohm
S/N Ratio	80 dB
Frequency Response	30Hz – 17KHz
Distortion	0.05% max.
Dims. (HxWxD)	50 x 35 x 20 mm
10K Ohm Input Impedance	CPM004 User Manual
Supply Voltage	6-18V dc (e.g. CFE002)
Current Consumption	2mA min. - 10mA max.
Input Impedance	100K Ohms
Signal Input	5mV min. - 300mV max.
Output Signal	2V max.
Output Impedance	1K Ohm
S/N Ratio	80 dB
Frequency Response	30Hz – 17KHz
Distortion	0.05% max.
Dims. (HxWxD)	50 x 35 x 20 mm
22K Ohm Input Impedance	CPM007
Supply Voltage	6-18V dc (e.g. CFE002)
Current Consumption	2mA min. - 10mA max.
Input Impedance	100K Ohms
Signal Input	5mV min. - 300mV max.
Output Signal	2V max.
Output Impedance	1K Ohm
S/N Ratio	80 dB
Frequency Response	30Hz – 17KHz
Distortion	0.05% max.
Dims. (HxWxD)	50 x 35 x 20 mm