CI0210 - 2 Channel Programmable Sequential Controller Relay Module

Highly flexible 2 channel programmable sequential relay controller module. Each channel can be programmed with up to 120 STEP instructions offering a choice of three output states "Activate", "Deactivate" or "Set according to External Input status". The duration of each STEP can be set between 0.5 Sec and 100 Minutes. Programmes are stored in non-volatile memory.

Each channel has an External Input for connection to a contact closure (e.g. push/slide switch, relay, etc). When the program reaches a STEP set to EXternal it will read the that channels External Input status and Activate the corresponding output if the contacts are closed or Deactivate it if the contacts are open.

Programmes can be deleted or modified as required using the LCD display and push buttons on the display board.

The module includes protection against inverse polarity, output status LEDs and screw terminal connectors. Requires external 12V dc power supply  (Order Code PSU446 with connector 778.106).

Please see Order Code CI0211 for a 4 channel version of this product.

Technical Specifications
Power Supply	12V dc (e.g. Order Code PSU446 with connector 778.106 or CFE103 module)
Current Consumption	30mA min - 125mA max.
Maximum Program Memory	120 Steps
Selectable Step Times	0.5 Seconds to 99 min 59 sec 9 msec
Output	2 x SPDT Relay
Maximum Output Load (Resistive)	Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet)
Relay Connections	NO, NC, C (Relay FAQ)
Protection against Inverse Polarity	Yes
Dimensions (WxHxD)	Main Board: 109 x 75 x 30 mm Display Board: 131 x 52 mm
Board Connections	Screw terminal blocks
Product Format	PRE-ASSEMBLED Electronic Module more
Documentation	User Manual