CI0139 - 230Vac Turn-Off Delay Timer Relay Module (2 to 45 Minute)

2 to 45 minute "Disconnection" or "Turn-off" or "Instant-on and hold, delayed off"  timer module with a mains rated relay output. When Start input is activated, the relay turns on but the user-set delay period does NOT commence. This state is maintained while the trigger signal is present. Loss of trigger signal starts the delay timing cycle. Relay releases at end of delay period and timer returns to waiting state. Delay period is restarted if trigger input is activated during the turn-off delay time.

Timer is activated using the Start Switch input (push-button contact closure).

The delay period is adjustable from 2 to 45 minutes using the onboard potentiometers (header pins allow the use of user-supplied external potentiometers if required).

Applications: Allows a pump or fan to remain on for a while after a sensor detects a pre-set level, to prevent cycling.

• NO, NC, C relay output connections (Relay FAQ)
• User adjustable delay time
• Simple contact closure activation
• LED "active" indicator
• Reverse polarity protection
• Screw terminal blocks for all connections
• See Order Code CI0138 for a 1 - 180 second version of this product

Technical Specifications
Operating Voltage	230Vac
Current Consumption	~ 50mA
Output	1 x SPDT Relay
Maximum Output Load (Resistive)	Up to 240Vac or 28Vdc @ 5 Amps max. (Relay Datasheet)
Relay Connections	NO, NC, C (Relay FAQ)
Dimensions (HxWxD)	~ 44 x 76 x 30 mm
Enclosure	WCAH2853
Product Format	PRE-ASSEMBLED Electronic Module more
Documentation	User Manual - sorry not available