Camera Evaluation Board Driver Software

System Requirements: Pentium running Windows 95/98/ME with ECP parallel port. Please note that the drivers are not designed to run under Windows NT/2000 and XP (extra drivers are available directly from the OVT website at http://www.ovt.com/ov_downloads.html but we do not offer any support on these)
Ensure to get the right driver for relevant camera/image sensor. In particular, check if the camera has an A suffix part number. If the captured images are scrambled, one possibility is that you are using the wrong driver.
Ensure the parallel port is set to ECP/EPP
Ensure no other software drivers are opened when running EV board (e.g. printer drivers)
The software source code is not available
Old EV Board cannot use new driver. For the Rev A EV Board, can use CEV38_A
The purpose of developing the EV38 and EV48 evaluation boards was to enable greater understanding of CMOS sensor data grabbing and demonstrate the effect of internal register setting changes. Therefore, only limited memory size is put on the EV boards. Consequently, you cannot use it to get full size VGA image when using C3188A.

Part No.	Description
UC5172 / UC5181	USB Drivers, documentation and datasheets for UC5172 and UC5181 USB camera modules (see also http://www.ovt.com/ov_downloads.html)
EVM3188	EV Board driver for model CE38-M3188, for sensor OV7110
EVM3188A	EV Board driver for model CE38-M3188A, for sensor OV7120
EVC3188	EV Board driver for model CE38-C3188, for sensor OV7610
EVC3188A	EV Board driver for model CE38-C3188A, for sensor OV7620
CEV38_A	A new driver works for all the above modules, require EV board of Rev-A
EVM4088	EV Board driver for model CE48-M4088. It includes Cev50.exe, operation manual in pdf format. Note: this driver runs under Win98. If runs under Win95, some extra files may required. Contact us for details.

Part No.