Self-Assembly Electronic Kit (Soldering Required)
Offers very impressive light effects thanks to very good channel separation between the low, medium and high frequency signals. Each of the three channels can drive mains voltage loads of up to 1000 Watts.
Easily connects to any audio amplifier with 1 to 100 Watts output power or other suitable audio signal. Uses three opto-couplers to completely isolate the mains voltages from the audio source.
Input sensitivity is adjustable. An onboard transformer provides power to the DC control circuitry.
Kit includes all board mounted components, transformer, heatsinks and solder for assembly.
The module is designed for use with conventional incandescent filament light bulbs only.
NOT suitable for use with inductive loads or other types of bulbs e.g. fluorescent, CFL, halogen, transformer, etc.Specifications
| Operating voltage:||230Vac 50Hz Mains|
|Power output per channel||1000W (peak) @ 230Vac mains|
|Input signal level||2.5V to 28V AF|
|Circuit power consumption||4VA AC|
|Input impedance||500K Ohm|
|Filter frequency responses||LOW: 10 Hz - 160 Hz|
MIDDLE: 350 Hz - 850 Hz
HIGH: 1.8 kHz - 12 kHz
|Board Dimensions||112 x 102 x 30 mm|
|Board connections||Solder posts|
|Product Format||SELF-ASSEMBLY Electronic Kit (KT) only more|
| WARNING!||This product operates at potentially lethal mains voltage. Construction, installation, testing and commissioning should only be attempted by competent persons, or under supervision of someone fully experienced in this field. Many areas of the assembly (including heatsinks) may operate at mains voltage. It must be fitted into a suitable isolating enclosure to avoid injury or death. This product is not suitable for children. more|