FORMATS AVAILABLE: Self-Assembly Electronic Kit
(Soldering Required) or Pre-Assembled Module (AS)
Phase-Locked Loop (PLL) based crystal-locked wide band synthesised FM transmitter delivering a high quality, stable 10mW output. Accepts both MIC audio signal (10mV) and LINE input (1v p-p) for example hi-fi, CD, audio mixer (like kit 1052) or computer sound card.
The Radio Frequency (RF) output circuitry includes a three-pole filter for reduction of harmonics and other spurious signals. The spurious output signal level is better than -40dBc (0.0001 times the power of the wanted signal level), which makes the project suitable for driving an external power amplifier.
It delivers up to 10milliwatts of RF power to the antenna which can be a simple single wire about 74cm long (or open dipole or ground plane). Output power can be boosted to 250mW when used with our FM Power Amplifier 3171.
Ideal project for the beginner who wants to get started in the fascinating world of FM broadcasting. See documentation link below for full details.
The transmitter is powered from a 12v supply, but it will operate from 9 Volts to 16 Volts. Please note that most standard DC mains adaptors are unsuitable for powering FM transmitters as they introduce an intolerable level of mains hum.
See Connectors page and Leads page for connection hardware - 778.106 socket for power; CB1002 cable for audio input; and optional RG58 cable for antenna (a simple wire antenna is adequate to start off).
- !! Not for sale in the UK or EU!! Please do not order this item if you live in the EU. The item will be removed from your order and refunded accordingly.
|Modulation type||Crystal-controlled Wide Band Frequency Modulated (WBFM)|
|Frequency||88-108 MHz (see documentation link below)|
|Output power||10 milli-watts (+10dBm)|
|Working voltage||12Vdc (tolerance 9-16Vdc)|
|Power Supply||Lead acid or dry cell battery or kit 1171|
|Board Dimensions||~68 x 72 x 20mm|
|Board Connections||Solder pads|
|Product Formats||SELF-ASSEMBLY Electronic Kit (KT) more|