3017 - LM386 Mono Audio Amplifier Module

Tiny, battery powered, variable gain mono audio amplifier using the LM386 IC. Perfect building block in other projects e.g. radio & TV sound system amplifiers, intercoms, line drivers, ultrasonic & servo drivers, voltage converters, small passive speakers, etc.

Ideal for battery operation with it's wide operating supply (4 - 12Vdc) and low quiescent current drain. Volume control pot. LED ON indicator. On/Off switch. Jumper for settable voltage gain of 20 or 200 (26/46dB).

Pre-Amp Kit 3098 is designed specifically for use with this kit where you have an input signal of insufficient amplitude.

Technical Specifications
Power Supply	4 - 12V dc at 1 - 3 VA
Idle current	~ 4 mA w/o LED. (10-15mA with LED)
Power output	> 1 Watt RMS max. 8 ohms, 12V DC > 0.4 Watt RMS continuous
Output impedance	4 - 8 Ohm
Freq. Resp.	> 40 Hz – 20 kHz, 8 ohm ~ 40 – 100 kHz, – 3dB, G=20
THD	< 1 % @ 400 mW, 12V DC < 0.2 % @ 125 mW
S/N ratio	> 70 dB, G = 20 > 50 dB, G = 200
Gain	~ 26 - 46 dB maximum
Input Z	~ 10 k ohm
Board Dimensions	~ 30 x 30 X 15 mm
Board Connections	Solder pads
Product Format	SELF-ASSEMBLY Electronic Kit (KT ) or PRE-ASSEMBLED Electronic Module (AS) more
Documentation	User Manual LM386 Data Sheet

• See 3115 for a stereo version of this product