1016 - Mono Loudspeaker Protection
This
mono loudspeaker protection circuit works with any audio amplifier from 1 to
100 Watts. It will protect your speakers from signal spikes and your ears from
unpleasant surprises! It completely eliminates the possibility of loud speakers
being damaged due to overloads.
The circuit is activated by peak signals, excessive output power and also the presence of DC voltages across its input when there is a fault in the output stage of the amplifier. It is connected in the output of the amplifier and when it is activated it inserts a 56 ohm resistor in series with the speakers attenuating the output of the amplifier by -15 dB.
See Order Code 1112 for a Stereo Loudspeaker Protection with Delay
| Technical Specifications | |
|---|---|
| Working voltage | 9-15Vdc i.e. PP3 battery (Order Code 656.020), mains adapter (Order Code PSU443 with connector 778.106) or kit 1061 |
| Max. current consumption | 50 mA |
| Quiescent current | 2mA |
| Input power | 100 Watts Maximum |
| Board Dimensions | 59x74mm |
| Board Connections | Solder Posts |
| Product Format | Electronic Kit (KT
 )
only
more |
| Documentation |
 User
Manual |
| Product Code |
Description | Price each exc. VAT (GB Pounds £) |
INC. VAT each 1+ |
Quantity | |
|---|---|---|---|---|---|
| 1+ | 5+ | ||||
1016KT |
Mono Loudspeaker Protection Kit | £9.32 | £7.92 | GB£10.95 | |
Please see our Audio Electronics page for more products like this
